×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

John Deere BP15
Belt Pickup Platform


  • Pick up 30 acres of wheat and 23 acres of canola windrows per hour with an X9 Combine and BP15*
  • Increase feed auger speed by 20% for canola and high-yielding wheat**
  • Appropriately set larger 20” gauge wheels without tools to match changing conditions
  • Save up to 0.10 bushels of canola per acre with a factory installed Crop Shield***

Features

Fly through windrows and capture more crop
X Series Combine with BP15 X Series Combine with BP15

John Deere Combines increase capacity in tough canola and other windrow crops; don’t limit this extreme performance by pairing it with a different belt pickup. No matter what crops or conditions you face, including thick canola, blown crop, or uneven windrows, the BP15 helps you put more grain in the tank while you cover more acres per day.

  • Pick up 30 acres (12.1 ha) of wheat and 25 acres (10.1 ha) of canola windrows per hour with a John Deere X Series Combine and BP15 – The wider feeder house opening with adjustable feed auger flighting and tines enables higher productivity than the S790 Combine with the 615P Belt Pickup.
  • Reduce slug feeding and the chance of plugging – Increase feed auger speed by 20 percent (compared to the 615P) with a two-speed auger drive sprocket for canola and high-yielding wheat. Or, use the slower speed feed rate for less bulky crops like cereals and grass seed. A feed auger spacer keeps the position of the auger at maximum height when harvesting large windrows.
  • Send grain into the feeder house – The windscreen and a factory-installed crop shield move free grain into the tank, reducing the amount of debris on  the feeder house or hitting the windshield while reducing grain loss over the backsheet by up to 0.1 bu/acre in canola.
  • Handle large windrows without slowing down – Reduce plugging in large windrows with a heavy-duty clutch located at the auger rather than the platform back shaft. In the rare case of a plug, take care of it without leaving the cab with the hydraulic reverser. The removal system automatically activates when the feeder house is reversed and delays the belt engagement. The belt delay feature is exclusive to John Deere.

Specs & Compare

ADD MODEL

Key Specs

BP15
Current Model
Total picking width4.55 m
14.9 ft
Header height controlElectrohydraulic
Number of fingers per belt84 center belts
77 outer belts
Auger diameter66 cm
26 in.
Auger fingersSteel with breakaway notch
Diameter: 15.9 mm
0.625 in.

Header

Transport widths5.35 m
17.5 ft
Header height controlElectrohydraulic

Pickup Belts

Width of belts1.13 m
3.7 ft
Number of belts per pickupFour picking, four transfer
Total picking width4.55 m
14.9 ft
Operating speed of belts3-150 m/min
10-475 fpm
Number of rollersTwo picking, two transfer

Pickup Fingers

TypePlastic
Number of fingers per belt84 center belts
77 outer belts

Auger

Float range57 mm
2.25 in.
Diameter66 cm
26 in.
Auger fingersSteel with breakaway notch
Diameter: 15.9 mm
0.625 in.
Number of auger fingers19 STS, maximum 22
Auger finger patternIn-line, retracting
Finger reach152 mm
6 in.
Operating speedAt 520 feederhouse speed: 15t: 180 rpm
18t: 216 rpm

Tires

AdjustmentToolless
Pressure1 bar
103.4 kPa
15 psi

Crop deflector

Weight

Additional information

Offers & Discounts

No current offers.

Videos