×
Quick Equipment Search
Equipment Fliter










used search tag used search tag

John Deere DM50 Series
Disc Mowers


  • Rope System transport latch
  • Quick-remove shear hub assembly
  • DM5050 & 5060 iMatch and Quick Coupler compatible
  • DM5070 Cat. 2 Quick Coupler compatible

Features

Simple float spring tension adjustment
DM50 Series float spring tension adjustment DM50 Series float spring tension adjustment
#

Set the float spring to get maximum performance during operation. Adjust properly so the down pressure does not damage crop stubble as the skid shoes pass through the field.

Park stand and arm system
Park stand in park position Park stand in park position
Park stand in operating position Park stand in operating position

The DM50 Series Disc Mower park stand and parking arm work together to transfer the mower’s weight to the cutterbar while in the parked position. This makes the attachment process easier, saving time and frustration.

Park arm in park position Park arm in park position
Park arm in operating position Park arm in operating position
Shear hub assembly serviceability
Oval-shaped disc removed Oval-shaped disc removed
#

Cutterbar serviceability is easier on the DM50 Series Disc Mowers. Remove the oval-shaped disc(s) with only four bolts per disc. The shear hub assembly can be serviced by removing the remaining four bolts. This will save time and oil replacement costs by not splitting the entire cutterbar to replace the sheared hubs as required in previous models. 

Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series
Shear hub assembly on DM50 Series Shear hub assembly on DM50 Series

Take the shear hub assembly off the cutterbar by removing only eight bolts.

Transport lock system
DM50 in transport position DM50 in transport position
DM50 in operating position DM50 in operating position

The transport lock system is a simple mechanical system that saves time and ensures safety. Use the rope system to raise the transport lock, engage selective control valve (SCV) 1 to bring the cutterbar into the transport position, and release the rope system to lock for transport.  

Outer swath wheel
Outer swath wheel Outer swath wheel
#

Add the outer swath wheel to the DM50 Series Disc Mower to achieve separation between cut and uncut crop. By keeping the cut crop out of the uncut crop, cutting is not happening twice, which would reduce overall productivity. The swath wheel is fully adjustable up and down the length of the cutterbar, and it bolts directly to the top frame with U-bolts.

Specs & Compare

ADD MODEL

Dimensions

DM50 Series
Current Model
Cutting width2.36 m
7.7 ft
Swath width1.75 m
5.7 ft
Operation of cutting angle+/- 25 degree (angle)

Weight

Per machine442 kg
975 lb
Shipping (1 unit and crate)998 kg
2,200 lb

Tractor compatibility

Hitch

CategoryCategory 1, Category 2 - iMatch and Quick-Coupler compatible
Type3-point

Cutterbar

Cutting discs

QuantitySix
rpm3,000 rpm

Knives

V-belts with tensioner

Set-up time (per unit)

Warranty

Additional information

Offers & Discounts

studio image of 450E round baler

0% APR fixed rate for 36 months1

on new John Deere Hay and Forage Tools

  • 0% APR fixed rate for 36 months1
  • Offer available 26 October 2024 through 03 February 2025

Reviews

Videos