John Deere iTEC™ Pro
iTEC™ Pro
- Increased machine automation allows operator to focus their attention on the quality of the job.
- Improves productivity through consistent, repeated optimized end turns across a field.
Features
- Headland – iTEC Pro
- Turn pattern
- Main field – AutoTrac™ steering system
- Headland boundary
- Field boundary
iTEC Pro stands for Intelligent Total Equipment Control. Compatible with the GreenStar™ 3 or GreenStar 2 system. iTEC Pro is the next step toward complete tractor automation and works with SF1, SF2, or RTK accuracy levels.
This innovative solution coordinates machine and implement functions with end turns by utilizing the GreenStar 3 2630, or GreenStar 2 2600 Display, as well as the StarFire™ 3000 Receiver, or StarFire iTC Receiver. As illustrated in the diagram above, by knowing the location of the machine, the location of the boundaries, and a sequence of functions, iTEC Pro enables operators to automate many in-cab tasks. By automating these functions, the machine and implement functions can perform consistently on headlands or internal boundaries.
When paired with AutoTrac, this system accurately guides the tractor around an optimal end of row that is configured based on implement and machine dimensions input into the display.
By automating these tasks, this system also correctly positions the machine and implement for the next field pass to increase accuracy and efficiency. Operating at optimal speeds with correct implement functions happening, when programmed, is all made easy with iTEC Pro.
iTEC Pro helps growers reach a higher level of precision and efficiency.
iTEC Pro also reduces operator fatigue and increases efficiency.
Once they have experienced it, they will not want to turn around without it. There is no better way to start the experience than with an iTEC Pro demonstration.
iTEC Pro automatically guides the tractor around the optimum pass and carries out end-of-row functions at appropriate times during the sequence. This functionality reduces input costs and reduces strain on the operator.
When operators spend their workday manually steering a tractor and implement around during an end-of-row turn while also watching for obstacles and executing end-of-row functions such as raising the planter and down shifting the tractor, they tend to get tired. This causes headland inconsistencies.
iTEC Pro offers many benefits to the operator:
- Ability to watch the tractor and implement more closely to maintenance parts, allowing for proactive measures rather than reactive fixes
- Ability to more closely watch for damaging obstacles such as rocks, washouts, or holes caused by broken tile lines
- Increased productivity through faster, more efficient end turns
All of these benefits result in more uptime for the equipment and an operator who is more alert at the end of the day.
A potential reduction in headland or internal boundary overlaps and skips may not sound like much at first, but operators who add it up acre after acre could be looking at a substantial savings potential with iTEC Pro.
The more irregularly shaped the fields and the more headland turns there are, the quicker iTEC Pro adds up the savings. Using iTEC Pro allows operators to perform faster, more efficient, hands-free headland turns with a consistency that is hard to match, no matter the field conditions or experience level of the operator.
When dialed in, iTEC Pro performs consistently and accurately. This increases in-field efficiency by saving operators money and time.
Specs & Compare
Offers & Discounts
Accessories & Attachments
Autotrac Integrated Machine Kits
Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.
Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.
AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.
These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.
These kits contain all of the required hydraulic components and harnesses for field installation.
GreenStar display options:
- GreenStar 3 (GreenStar3) 2630 and CommandCenter™
- AutoTrac activation for GreenStar 3
- GreenStar 2 1800
- AutoTrac activation for GreenStar 2
StarFire™ Receiver and signal options:
- StarFire 3000
- SF1, SF2 activation, or RTK
AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.
These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.
These kits contain all of the required hydraulic components and harnesses for field installation.
GreenStar display options:
- GreenStar 3 (GreenStar3) 2630 and CommandCenter™
- AutoTrac activation for GreenStar 3
- GreenStar 2 1800
- AutoTrac activation for GreenStar 2
StarFire™ Receiver and signal options:
- StarFire 3000
- SF1, SF2 activation, or RTK
AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.
These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.
These kits contain all of the required hydraulic components and harnesses for field installation.
GreenStar display options:
- GreenStar 3 (GreenStar3) 2630 and CommandCenter™
- AutoTrac activation for GreenStar 3
- GreenStar 2 1800
- AutoTrac activation for GreenStar 2
StarFire™ Receiver and signal options:
- StarFire 3000
- SF1, SF2 activation, or RTK
AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.
These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.
These kits contain all of the required hydraulic components and harnesses for field installation.
GreenStar display options:
- GreenStar 3 (GreenStar3) 2630 and CommandCenter™
- AutoTrac activation for GreenStar 3
- GreenStar 2 1800
- AutoTrac activation for GreenStar 2
StarFire™ Receiver and signal options:
- StarFire 3000
- SF1, SF2 activation, or RTK
AutoTrac field-installed kits are now available for 6210R, 6190R, and 6170R MFWD Tractors.
These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors.
All required hydraulic components and harnesses for field installation are contained in these kits.
GreenStar™ display options:
- GreenStar 3 2630 and CommandCenter™
- AutoTrac activation for GreenStar 3
- GreenStar 2 1800
- AutoTrac activation for GreenStar 2
StarFire™ Receiver and signal options:
- StarFire 3000
- SF1, SF2 activation, or Real Time Kinematic (RTK)
The AutoTrac system reduces overlap, saving time, fuel, and labor costs. Whether breaking stubble with tillage equipment, planting or seeding, spraying or fertilizing, it reduces implement overlap by up to 90 percent. It also provides faster headland turns because the AutoTrac system takes the guesswork out of the return path.
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™ machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.
Key features of the integrated AutoTrac steering kit:
- Integration, for a clean look in the machine
- Uses GreenStar components and AutoTrac software
- Works with the Original, GreenStar 2, or GreenStar 3 systems
- Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
Autotrac Universal Supplemental Kits
The AutoTrac™ Universal (ATU) auxiliary resume switch enables the ATU unit to be engaged from a remote location in the cab or operator's station.
The switch can either be mounted directly to a rigid surface or disassembled to allow panel mounting.
By installing this switch, operators can engage the ATU system in a location that provides them easy access and is convenient for all their applications throughout the growing season.
NOTE: This attachment is orderable through the AMS Price Pages as part number PF90453.
AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.
AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.
AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.
Greenstar Harnesses
Greenstar Implement Control Kits
Machine specific kits provide dealers with all of the hardware and harnessing to equip your 2410C or 2510H with dry applicator with AccuFlow Vortex Cooler minus:
- EVA hose
- Vapor hose
- Nurse tank hose
- GreenStar Rate Controller